Range of Services
We are accredited by NABL (M/s. National Accreditation Board for Testing and Calibration Laboratories), under
the Department of Science & Technology, Government of India, New Delhi, in accordance with the International Standard
ISO / IEC : 17025 : 2017. Our laboratory is capable of Providing lab and on-site calibration services in following discipline.
- Voltage: 0-1000V AC/DC,Current:0-1000A AC/DC,Resistance: 10µΩ-90GΩ
- Frequency:1Hz-10mHz, Capacitance:10nF-1F.
- Inductance:100µH-1H, Time: 1s-2Hr’s, Tan delta: 100pF up to 12KV
- High Voltage: 28KVAC /40KV DC, Power: 3Watts - 7.2Kwatts
- Energy: 3Watts/Hr- 7.2Kwatts/Hr, Power factor: 0.5Lead /Lag.
- 1Ø & 3Ø AC Power & Energy meter
- 3.5 to 6.5 Digital Multimeter (AC/DC), Clamp meter, leakage current tester(AC/DC)
- Digital & Analog Voltmeter
- Earth Resistance Tester
- Insulation Resistance Tester or Megger
- Motor Checker
- LCR Meter
- High Voltage Test Kit ( Hi-Pot)
- Digital Micro ohm Meter
- Contact Resistance Meter
- Frequency Counter
- Photo Tachometer
- Timer / Transducers
- 1Ø & 3Ø Relay Testing kit
- Tan delta Test kit
- Function Generator up to 80MHz
Electro-Technical
- Pressure -1 to 1000 BAR
- Pressure & Vacuum Gauges
- Pressure & Vacuum Transmitter
- Master Pressure Calibrators
- Pressure & Vacuum Switches
- Differential Pressure Sensors
- Pressure Regulators & Recorders
- I/P,P/I Converter
- Manometer
- -40°C to 1200°C
- Temperature Stimulators
- RTD’s & Thermocouples
- Temperature Gauges
- Temperature Transmitters / Switches
- Temperature Indicator / Controllers
- Thermometer Wet / Dry
- Temperature Bath Calibrators
- Refrigerator
- Hot Air Oven
- Muffle furnace
Mechanical
Thermal
Project List
- Major order received work order from M/s. NTPC GE Power Services Pvt Ltd., for Calibration of Instruments.
- Major order received work order from M/s. JSW Steel Limited., for Calibration of Instruments.
- Major order received work order from M/s. Amplus Solar power MH Pvt Ltd., for Calibration of Instruments.
- Successfully received work order from M/s. Shapoorji Pallonji Energy Integrated Solutions Pvt Ltd., for Calibration of Instruments.
- Successfully received work order from M/s. Zuari Cements Ltd., for Calibration of Instruments.
- Successfully received work order from M/s. Steag Energy Services India Pvt Ltd., for Calibration of Instruments.
Our Team
Mr. K. Saravanakumar
DGM - IC CS [MET]
×
Mr. K. Saravanakumar
DGM - IC CS [MET]
Overall experience in the field of calibration is 15 years. NABL Calibration for all Electrical, Pressure and Thermal Instruments.
[email protected]@voltechgroup.com
+91-9092116805
Connect With Us
We're here to assist you with your inquiries and project needs.Reach out to us for expert guidance, reliable solutions and seamless support tailored to your business. Let's build the future together!